EINHELL RT-RH 32 Original Operating Instructions

GB
- 17 -
the risk of an electric shock.
8.2 Carbon brushes
In case of excessive sparking, have the carbon
brushes checked only by a qualifi ed electrician.
Danger! The carbon brushes should not be rep
laced by anyone but a qualifi ed electrician.
8.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.4 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
Anl_RT_RH_32_SPK9.indb 17Anl_RT_RH_32_SPK9.indb 17 14.03.2019 11:26:4514.03.2019 11:26:45

EINHELL RT-RH 32 Specifications

General

Cord length	4.45 m
Input power	1250 W
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Impact rate	4300 bpm
Rated speed (max)	800 RPM
Impact energy (max)	3.5 J
Drilling diameter in steel (max)	- mm
Drilling diameter in concrete (max)	12 mm
Soft grip	Yes
Chuck type	SDS Plus
Product color	Red
Power protection features	Overload

Weight and Dimensions

Width	135 mm
Height	340 mm
Weight	6050 g
Package weight	9450 g