EINHELL RT-RH 32 Original Operating Instructions

GB
- 19 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes, chuck
Consumables* Drill bits, chisels
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_RT_RH_32_SPK9.indb 19Anl_RT_RH_32_SPK9.indb 19 14.03.2019 11:26:4614.03.2019 11:26:46

EINHELL RT-RH 32 Specifications

General

Cord length	4.45 m
Input power	1250 W
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Impact rate	4300 bpm
Rated speed (max)	800 RPM
Impact energy (max)	3.5 J
Drilling diameter in steel (max)	- mm
Drilling diameter in concrete (max)	12 mm
Soft grip	Yes
Chuck type	SDS Plus
Product color	Red
Power protection features	Overload

Weight and Dimensions

Width	135 mm
Height	340 mm
Weight	6050 g
Package weight	9450 g