To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the EINHELL TC-BD 450 and is the answer not in the manual?
General| Chuck type | Key |
|---|---|
| Chuck mount | B16 |
| Product type | Bench drill press |
| On/off switch | Yes |
| Product color | Black, Red |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| Throat depth | 104 mm |
| Number of speeds | 5 |
| Rotational speed (max) | 2650 RPM |
| Rotational speed (min) | 600 RPM |
| Drill bit diameter (max) | 13 mm |
| Drill bit diameter (min) | 1.5 mm |
| Drill table tilting | -45 - 45 ° |
Weight and Dimensions| Weight | 12990 g |
|---|---|
| Package depth | 398 mm |
| Package width | 251 mm |
| Package height | 471 mm |
| Package weight | 14890 g |
