GB
- 19 -
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Warning!
Read all the safety information, instructions,
illustrations and technical data provided on
or with this power tool. Failure to adhere to the
following instructions may result in electric shock,
fi re and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.
2. Layout and items supplied
2.1 Layout (Fig. 1/2a- 2c)
1. On/Off switch
2. Safety window
3. Spark defl ector
4. Cover
5. Coarse grinding/sanding wheel
6. Fine grinding/sanding wheel
7. Workpiece support
8. Mounting holes
9. Base plate
10. Motor housing
11. Socket head screw
12. Small washer
13. Small spring washer
14. Nut
15. Long lock bolt
16. Small locking button
17. Short lock bolt
18. Large washer
19. Large spring washer
20. Large locking button
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Double-wheel grinder
•
Safety glass (2x)
•
Spark deflector (2x)
•
Workpiece support (2x)
•
Socket head screw (4x)
•
Washer (small) (6x)
•
Spring washer (small) (6x)
•
Nut (4x)
•
Lock bolt (long) (2x)
•
Locking knob (small) (2x)
•
Lock bolt (short) (2x)
•
Washer (large) (2x)
•
Spring washer (large) (2x)
•
Locking knob (large) (2x)
•
Original operating instructions
•
Safety information
3. Proper use
The double wheel grinder is a combination tool
for the coarse and fi ne grinding of metals, plastics
and other materials using the appropriate grinding
wheels.
The machine is allowed to be used only for its
intended purpose! Even when the equipment is
Anl_TC-BG_150_SPK9.indb 19Anl_TC-BG_150_SPK9.indb 19 16.06.2020 15:18:2716.06.2020 15:18:27
To Next Page
Loading...
