EasyManuals Logo

EINHELL TC-SY 700 S User Manual

EINHELL TC-SY 700 S
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
GB
- 36 -
11. Viscosity Table
Examples of spray materials. Follow the
manufacturer‘s instructions!
Draining time in seconds (DIN-sec)
Solvent-borne primers 25-30
Solvent-borne paint 15-30
Water-borne primers 25-30
Water-borne paint 20-25
Wood preservatives, stains, oils undiluted
Disinfectants undiluted
Vehicle topcoats 20-25
12. Troubleshooting Guide
Problem Possible Cause Solution
No material exits
from the nozzle
Nozzle clogged
Material tube clogged
Max. paint volume control rotated too far
anti-clockwise (-).
Material tube is loose.
No pressure build-up in the container.
Consistency of the material is too thick.
Clean
Clean
Turn clockwise (+)
Insert
Tighten container
Dilute
Material drips from
nozzle after spray-
ing
Nozzle is loose.
Nozzle is worn.
Nozzle seal is worn.
Solids in the air cap or nozzle.
Tighten
Replace
Replace
Clean
Atomization too
coarse
Material viscosity too high
Material volume too high
Max. paint volume control turned too far
clockwise (+).
Dirty nozzle.
Insu cient pressure build-up in the con-
tainer
Dilute
Turn the max. paint volume con-
trol anti-clockwise (-)
Clean
Tighten the container
Intermittent („ utte-
ring“) spray
Almost all of the material in the container
has been used up.
Add more
Coating pattern is
too light and uneven
You moved the paint spray gun too fast ac-
ross the surface you are working on.
Move the gun more slowly.
The paint runs or
sags.
You applied too much material. Turn the max. paint volume con-
trol anti-clockwise (-)
Excessive spray
mist
The gun is held too far away from the object
you are working on.
Hold the gun closer.
Turn the max. paint volume con-
trol anti-clockwise (-)
Anl_SA_TC_SY_700_S_SPK8.indb 36Anl_SA_TC_SY_700_S_SPK8.indb 36 16.07.2018 09:00:1716.07.2018 09:00:17

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EINHELL TC-SY 700 S and is the answer not in the manual?

EINHELL TC-SY 700 S Specifications

General IconGeneral
Capacity1 L
Hose length3.5 m
Product colorBlack, Red, White
Spray gun purposePaint
AC input voltage220-240 V
AC input frequency50 Hz
Package depth410 mm
Package width530 mm
Package height305 mm
Package weight3200 g
Weight and Dimensions IconWeight and Dimensions
Weight2290 g

Related product manuals