To Next Page

To Previous Page

- 54 -

c) Keep children and other people away from the power tool

while you are using it. If you are distracted you may lose con-

trol of the power tool.

2. Electrical safety

a) The plug on the power tool must ﬁ t into the socket. The so-

cket must not be modiﬁ ed in any way. Do not use adapter

plugs together with power tools with a protective earth.

Unmodiﬁ ed plugs and matching sockets will reduce the risk of an

electric shock.

b) Avoid body contact with earthed surfaces such as pipes,

heating systems, stoves and refrigerators. There is an incre-

ased risk of suﬀ ering an electric shock if your body is earthed.

c) Keep the power tool out of the rain and away from moistu-

re. The ingress of water into an electric power tool increases the

risk of an electric shock.

d) Do not use the power cable for a purpose for which it is not

designed, for example to carry the power tool, hang it up

or to pull the plug out of the socket. Keep the power cable

away from heat, oil, sharp edges and moving parts. Power

cables that are damaged or tangled increase the risk of an elec-

tric shock.

e) If you use an electric power tool outdoors, use only exten-

sion cables that are suitable for outdoor use. The use of an

extension cable which is suitable for outdoor use reduces the

risk of an electric shock.

f) If you cannot avoid using the power tool in a damp loca-

tion, use a residual current device (RCD) circuit breaker.

The use of a residual current device (RCD) circuit breaker will

reduce the risk of suﬀ ering an electric shock.

3. Safety of persons

a) Be careful, watch what you are doing and be sensible

and responsible when using an electric power tool. Never

use the power tool if you are tired or under the inﬂ uence

Anl_TC_TS_2000_U_SPK9.indb 54Anl_TC_TS_2000_U_SPK9.indb 54 28.04.2020 14:40:0828.04.2020 14:40:08

EINHELL TC-TS 2000 U User Manual

Questions and Answers: