GB
- 87 -
•
The product is intended solely for use at connection points that
a) do not exceed a maximum permitted supply impedance Zsys
= 0.25 + j0.25, or
b) have a continuous current-carrying capacity of the mains of at
least 100 A per phase.
•
As the user, you are required to ensure, in consultation with your
electric power company if necessary, that the connection point
at which you wish to operate the product meets one of the two
requirements, a) or b), named above.
Anl_TC_TS_2000_U_SPK9.indb 87Anl_TC_TS_2000_U_SPK9.indb 87 28.04.2020 14:40:1028.04.2020 14:40:10
To Next Page
Loading...
