EINHELL TH-MS 2112 Original Operating Instructions

GB
- 25 -
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2002/96/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_TH_MS_2112_SPK7.indb 25Anl_TH_MS_2112_SPK7.indb 25 07.05.12 08:4507.05.12 08:45

EINHELL TH-MS 2112 Specifications

General

Input power	1600 W
Output power	1400 W
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Blade diameter	210 mm
Number of teeth	48
Idle speed (max)	5000 RPM
Cutting depth (90º)	- mm
Cross cut capacity (0° x 0°)	120 x 55 mm
Bevel cut capacity (0° x 45°)	80 x 55 mm
Miter cut capacity (45° x 0°)	120 x 32 mm
Compound cut capacity (45° x 45°)	80 x 32 mm
Saw blade included	Yes
Miter cut	45 - 0 °
Diamond disc	-
Product color	Red

Weight and Dimensions

Depth	480 mm
Width	320 mm
Height	290 mm
Weight	6400 g
Package weight	8700 g
Blade thickness	30 mm