EINHELL TH-MS 2112 Original Operating Instructions

GB
- 24 -
8.3 Maintenance
•
There are no parts inside the equipment
which require additional maintenance.
•
Lubricate all moving parts at regular intervals.
8.4 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and accessories out of
children’s reach in a dark and dry place at above
freezing temperature. The ideal storage tempe-
rature is between 5 and 30 °C. Store the electric
tool in its original packaging.
Anl_TH_MS_2112_SPK7.indb 24Anl_TH_MS_2112_SPK7.indb 24 07.05.12 08:4507.05.12 08:45

EINHELL TH-MS 2112 Specifications

General

Input power	1600 W
Output power	1400 W
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Blade diameter	210 mm
Number of teeth	48
Idle speed (max)	5000 RPM
Cutting depth (90º)	- mm
Cross cut capacity (0° x 0°)	120 x 55 mm
Bevel cut capacity (0° x 45°)	80 x 55 mm
Miter cut capacity (45° x 0°)	120 x 32 mm
Compound cut capacity (45° x 45°)	80 x 32 mm
Saw blade included	Yes
Miter cut	45 - 0 °
Diamond disc	-
Product color	Red

Weight and Dimensions

Depth	480 mm
Width	320 mm
Height	290 mm
Weight	6400 g
Package weight	8700 g
Blade thickness	30 mm