Eizo CG247 - Showing Button Guide; Functions

13
Chapter 1 Introduction
●
Showing Button Guide
When you press the front buttons (except the button), the button guide appears next to the button.
Note
• The button guide will continue to appear while the Adjustment menu or Mode menu is showing.
• The contents of the button guide will differ depending on the selected menu or status.
• In CAL mode, the brightness cannot be adjusted even though the button guide is displayed above the
and buttons.
●
Functions
The following table shows the menus for adjustment and setting items of each menu.
Main Menu Item Reference
Color
(Standard Mode)
*1
Brightness
“2-3. Adjusting Color” (page 20)
Temperature
Gamma
Color Gamut
Advanced
Settings
Hue
Saturation
Cliping
Gain
Black Level
6 Colors
Color Reset
“3-6. Setting Signal Bandwidth” (page 33)
Color
(CAL Mode)
*2
Target SelfCalibration
“4-1. Setting the Color Mode for Executing
SelfCalibration” (page 35)
Brightness
“4-4. Setting the calibration targets” (page 38)
White Point
Color Gamut
Gamut Settings
Gamma
Result
Calibration Result
“4-6. Checking Adjustment Results” (page 40)
Ambient Light
Color Reset
“3-6. Setting Signal Bandwidth” (page 33)