How to prevent afterimages on Eizo Lcd monitor?
If afterimages appear on your Eizo Lcd monitor, avoid displaying the same image for a long time. Use the screen saver or power saving function to prevent displaying the same image for extended periods. You can also change the image or keep the power turned off for several hours.
Why no audio output from my Eizo FLEXSCAN EV2456 Lcd monitor?
If there is no audio output from your Eizo Lcd monitor, check whether the stereo mini jack cable is connected properly. Ensure that the volume is not set to 0. Verify that the PC and audio playback software are configured correctly. Also, check the “Sound Source” setting when using DisplayPort input or HDMI input.
Why the setting menu does not appear on my Eizo FLEXSCAN EV2456?
If the Setting menu does not appear on your Eizo Lcd monitor, check whether the switch operation lock function is active.
Why windows or icons shifted position on Eizo Lcd monitor?
If you switch the power back on or return from power save mode and windows or icons have shifted position on your Eizo Lcd monitor (DisplayPort signal input), turn the setting “On” for “Compatibility Mode” on the “Administrator Settings” menu.
How to fix whole screen flickering or blurring on Eizo FLEXSCAN EV2456?
If the whole screen of your Eizo Lcd monitor is flickering or blurring, use “Phase” in the Setting menu to adjust it.
How to correct incorrect display position on Eizo FLEXSCAN EV2456?
If the display position is incorrect on your Eizo Lcd monitor, use “Position” in the Setting menu to correct the image position. If available, you can also use the graphics board’s utility to change the display position.
How to fix image not displaying on the entire screen of my Eizo Lcd monitor?
If the image does not display on the entire screen of your Eizo Lcd monitor, try changing the “Picture Expansion” in the Setting menu.
Why is the color not correct on my Eizo FLEXSCAN EV2456 Lcd monitor?
If the color shown on the screen of your Eizo Lcd monitor is not correct when using DisplayPort or HDMI input, try changing the “Input Color Format” in the Setting menu.
How to remove noise from Eizo Lcd monitor screen?
If noise appears on the screen of your Eizo Lcd monitor, set “Overdrive” to “Off” in the Setting menu. Note that when inputting HDCP system signals, normal images may not be displayed immediately.
How to fix no picture on Eizo Lcd monitor when the power indicator is off?
If the Eizo Lcd monitor shows no picture and the power indicator is off, ensure the power cord is properly connected. Turn on the main power switch located on the rear side of the monitor. If the issue persists, turn the main power switch off, wait a few minutes, and then turn it back on.
Identifies and explains front controls, indicators, and sensors on the monitor.
How to select the active input source for the monitor display.
Instructions for manually adjusting the screen brightness level.
Overview of navigating and performing adjustments within the monitor's setting menus.
Detailed explanation of adjustable settings like color, brightness, and gamma.
Configuration options for input signals, including picture expansion and sharpness.
Explanation of administrator-level settings like input detection and key lock.
Solutions for common issues where the monitor displays no image.
Troubleshooting steps for image quality issues like brightness and blurriness.
Solutions for issues not related to picture display, like audio or USB.
Technical specifications of the FlexScan EV2456 monitor.
General| 3D | No |
|---|---|
| HD type | WUXGA |
| Pixel pitch | 0.27 x 0.27 mm |
| Screen shape | Flat |
| Display diagonal | 24.1 \ |
| Separate H/V sync | Yes |
| Display resolution | 1920 x 1200 pixels |
| Display technology | LED |
| Native aspect ratio | 16:10 |
| Vertical scan range | 55 - 76 Hz |
| Horizontal scan range | 31 - 81 kHz |
| Viewable size, vertical | 324 mm |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 16.78 million colors |
| Viewable size, horizontal | 518.4 mm |
| Display brightness (typical) | 350 cd/m² |
| Supported graphics resolutions | 640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 1920 x 1200 (WUXGA) |
| USB hub version | 3.2 Gen 1 (3.1 Gen 1) |
| Headphone connectivity | 3.5 mm |
| USB upstream port type | USB Type-B |
| USB Type-A downstream ports quantity | 2 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (max) | 44 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 13.5 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Sustainability certificates | CB, CCC, CE, China RoHS, ENERGY STAR, EPEAT Bronze, Federal Communications Commission (FCC), ICES, PSE, RCM, RoHS, TCO, TUV, UKCA, VCCI, WEEE, cTUVus |
| Tilt up angle range | - ° |
| Number of OSD languages | 9 |
| Panel mounting interface | 100 x 100 mm |
| On Screen Display (OSD) languages | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE |
| RMS rated power | 2 W |
| Certification | CE, UKCA, CB, TÜV/GS, TÜV/Ergonomics (including ISO 9241-307), TCO Certified Generation 9, EPEAT 2018 (US), TÜV/Blue Low Light Content, TÜV/Flicker Free, RCM, cTÜVus, FCC-B, CAN ICES-3 (B), TÜV/S, PSE, VCCI-B, EPA ENERGY STAR, RoHS, WEEE, China RoHS, CCC |
| Product color | Black |
| Cables included | AC, USB |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth (with stand) | 190 mm |
|---|---|
| Height (with stand) | 351.4 mm |
| Weight (with stand) | 5700 g |
| Depth (without stand) | 45.5 mm |
| Width (without stand) | 531 mm |
| Height (without stand) | 341.9 mm |
| Weight (without stand) | 3700 g |
To Next Page