To Next PageTo Next PageWhy can't I use the USB hub function on my Eizo Monitor?
If the USB hub function isn't working on your Eizo Monitor, try setting Compatibility Mode to On. When connecting three or more monitors in a daisy chain using the USB hub function, use the bottom USB downstream port.
How to adjust brightness on Eizo Monitor?
If your Eizo Monitor screen is too bright or dark, use the Brightness or Contrast settings in the Setting menu to adjust it. Also, consider setting Auto EcoView to On, which automatically adjusts screen brightness based on ambient lighting.
Why are USB devices not working on my Eizo Monitor?
If USB devices aren't working when connected to your Eizo Monitor, first, check that the USB cable is correctly connected between your PC and the monitor, as well as between the peripheral and the monitor. Try using different USB ports on both the monitor and the PC. Rebooting your PC might also resolve the issue. You can also set Compatibility Mode to On. Please note that depending on the USB 3.1 host controller you are using, connected USB devices may not be recognized correctly. Finally, check the PC’s BIOS setting for USB when using Windows.
Why can't I change the brightness on my Eizo FlexScan EV2457?
If the brightness on your Eizo Monitor cannot be changed or changes on its own, try turning the Auto EcoView setting to Off.
Why is the Power Save function not working with my Eizo FlexScan EV2457 Monitor?
If the Power Save function of your PC isn't working correctly with your Eizo Monitor, turn the Compatibility Mode setting to On in the Administrator Settings menu.
Why doesn't the setting menu appear on my Eizo Monitor?
If the Setting menu does not appear on your Eizo Monitor, check whether the switch operation lock function is active.
What to do if there are interference patterns on my Eizo FlexScan EV2457 Monitor?
If interference patterns or pressure marks remain on your Eizo Monitor screen, leave the monitor with a white or black screen. The symptom may disappear.
How to fix incorrect color on Eizo FlexScan EV2457 Monitor?
If the color on your Eizo Monitor screen doesn't appear correct, try changing the Input Color Format in the Setting menu.
Why is the text blurred on my Eizo FlexScan EV2457?
If text appears blurred on your Eizo Monitor, ensure that your PC is configured to meet the monitor's resolution and vertical scan frequency requirements.
How to prevent afterimages on Eizo FlexScan EV2457 Monitor?
To prevent afterimages on your Eizo Monitor, avoid displaying the same image for extended periods. Utilize the screen saver or power-saving function. If afterimages do appear, change the image or turn off the power for several hours.
General| Screen Size | 24.1 inches |
|---|---|
| Resolution | 1920 x 1200 |
| Panel Type | IPS |
| Aspect Ratio | 16:10 |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Viewing Angle | 178° (H) / 178° (V) |
| VESA Mount | 100 x 100 mm |
| Color Depth | 8-bit |
| Connectivity | DisplayPort, HDMI, DVI-D |
