5-3. Problems Related to DisplayPort Daisy Chain
Connection
Problem Possible cause and remedy
1. The screen is not displayed. • For each monitor connected in the DisplayPort daisy chain
connection, conrm the following.
- Check whether “DisplayPort” is selected for the input signal.
- For monitors outputting the DisplayPort signal, check whether
“Version 1.2” is selected for “DisplayPort” in the “Administrator
Settings” menu (refer to “DisplayPort” (page 27)).
• Check whether the signal cable is properly connected. When
inputting the signal for DisplayPort, connect to
. is used when
outputting signals in a daisy chain connection.
• In order to use daisy chain connection, the graphics board of the
computer must support Multi-Stream Transport (MST). For details,
contact the manufacturer of the computer or the store where you
purchased the product.
• When using a daisy chain connection with a notebook PC, the
screen of the notebook PC may be counted as one monitor.
• The number of monitors it is possible to connect varies depending
on the monitors you are using and the graphics board of the
computer. For details, refer to the compatibility information on our
company website.
• Depending on the resolution of the monitor being connected,
the screen may not be displayed due to insufcient bandwidth.
For details, refer to the compatibility information on our company
website.
30
Chapter 5 Troubleshooting
To Next Page
Loading...
Need help?
General