Eizo FlexScan EV2457 User Manual

Chapter 6 Reference
6-1. Removing the Stand
The stand section of this product can be removed.
Attention
• Do not move the stand up and down after removing it. If you move the stand up and down while it is not attached
to the monitor, this may cause damage or injury.
• The monitor and the stand are heavy. If you drop the monitor or stand, this may cause damage or injury.
1.
LaytheLCDmonitoronasoftclothspreadoverastableandatsurfacewith
the panel surface facing down.
2.
Remove the stand.
As shown in the diagram, press the lock button (1) while holding rmly onto the support section of
the stand, and slide the stand in the direction of the pedestal on the bottom (2). Next, pull the stand
upwards to remove it (3).
(1)
(2)
(3)
32
Chapter 6 Reference

Eizo FlexScan EV2457 Specifications

General

Brand	Eizo
Model	FlexScan EV2457
Category	Monitor
Language	English