To Next PageTo Next PageWhy do interference patterns or pressure marks remain on the screen of my Eizo FlexScan EV2451?
If you notice interference patterns or pressure marks on your Eizo monitor screen, leave the monitor displaying a white or black screen. This symptom may disappear over time.
Why is my Eizo Monitor screen too bright or too dark?
If your Eizo monitor screen is too bright or too dark, adjust the “Brightness” or “Contrast” settings in the Setting menu. If the screen is too bright, you can also try setting the Auto EcoView setting to “On”, which allows the monitor to automatically adjust the screen brightness based on the ambient light.
How to fix an Eizo Monitor when there is no picture and the power indicator is off?
If your Eizo monitor isn't displaying a picture and the power indicator isn't lit, try these steps: First, ensure the power cord is properly connected. Next, turn on the main power switch located on the rear of the monitor. If it still doesn't work, turn off the main power switch, wait a few minutes, and then turn it back on.
What to do if windows or icons have shifted position on my Eizo FlexScan EV2451 Monitor?
If you are using a DisplayPort signal input and find that windows or icons have shifted position when you switch the power back on or return from power save mode, turn the setting “On” for “Compatibility Mode” on the “Administrator Settings” menu.
Why are USB devices not working when connected to my Eizo Monitor?
If USB devices aren't working when connected to your Eizo monitor, check the following: Ensure the USB cable is correctly connected. Try using a different USB port on the monitor or on your PC. Reboot your PC. Check whether the PC and OS are USB compliant. Update to the latest USB 3.0 driver provided by each manufacturer, or connect the monitor to the USB 2.0 port. Also, check the PC’s BIOS setting for USB when using Windows.
How to fix incorrect display position on my Eizo FlexScan EV2451?
To correct an incorrect display position on your Eizo monitor, use the “Position” setting in the Setting menu to adjust the image position, specifically the “Hor. Position” and “Ver. Position”.
What to do if my Eizo FlexScan EV2451 Monitor power indicator is lighting white?
If the power indicator on your Eizo monitor is lighting white, increase the “Brightness”, “Contrast”, or “Gain” in the Setting menu.
Why can't I adjust the brightness on my Eizo FlexScan EV2451?
If you cannot adjust the brightness on your Eizo monitor, it may be because Auto EcoView is set to On. Try setting Auto EcoView to Off. You can also change the maximum and minimum values for Brightness or Ambient Light in the Auto EcoView advanced settings.
What to do if Eizo FlexScan EV2451 Monitor says input signal is out of range?
If your Eizo Monitor displays the message that the input signal is out of the specified frequency range, check whether the PC is configured to meet the resolution and vertical scan frequency requirements of the monitor. You may also try rebooting the PC or selecting an appropriate setting using the graphics board’s utility.
How to fix the image not displaying on the entire screen of my Eizo FlexScan EV2451?
If the image on your Eizo Monitor does not display on the entire screen, try changing the “Picture Expansion” setting in the Setting menu.
General