Function Setting Value Description
DisplayPort Version 1.1
Version 1.2
The types of signals that the monitor can display can be
changed.
Attention
• When connecting monitors in a DisplayPort daisy
chain connection, select “Version 1.2” for the monitors
outputting DisplayPort signals.
• When connecting to a DisplayPort connector, the screen
may not be displayed properly because the DisplayPort
version of the computer is different from that of the
monitor. If this problem occurs, try conguring the version
setting.
On-Screen Logo On
Off
When the monitor is turned on, the EIZO logo appears on the
screen.
When this function is set to “Off”, the EIZO logo does not
appear.
Key Lock Off
Menu
All
In order to prevent changes to settings, the operation
switches on the front of the monitor can be locked.
• “Off” (default setting)
Enables all switches.
• “Menu”
Locks the
switch.
• “All”
Locks all switches except the power switch.
27
Chapter 4 Administrator Settings
To Next Page
Loading...
