EasyManuals Logo

Eizo FLEXSCAN EV2456 User Manual

Eizo FLEXSCAN EV2456
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
33
Chapter 6 Reference
Attaching the Optional Arm (or Optional Stand)
1. Lay the LCD monitor on a soft cloth spread over a stable and at surface with the panel surface
facing down.
2. Remove the stand.
As shown in the gure, while holding down the lock button (1), slide the stand toward the stand base until it
touches the stand base (2). Then, lift the stand up (3).
(3)
(1)
(2)
3. Attach the arm or stand to the monitor.
Use the VESA mounting screws supplied with this product when attaching the arm or stand.
Attaching the original stand
1. Remove the xing screws on the optional arm (or optional stand), and detach the optional arm (or
optional stand).
2. To prevent damaging the panel surface, lay the monitor with its panel surface facing down on a
soft cloth spread on a stable surface.
3. Attach the original stand.
As shown below, insert the four tabs on the stand into the square holes on the back panel (1) and slide the
stand towards the upper portion of the monitor until it makes a clicking sound (2).
(1)
(2)
Click
!

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Eizo FLEXSCAN EV2456 and is the answer not in the manual?

Eizo FLEXSCAN EV2456 Specifications

General IconGeneral
3DNo
HD typeWUXGA
Pixel pitch0.27 x 0.27 mm
Screen shapeFlat
Display diagonal24.1 \
Separate H/V syncYes
Display resolution1920 x 1200 pixels
Display technologyLED
Native aspect ratio16:10
Vertical scan range55 - 76 Hz
Horizontal scan range31 - 81 kHz
Viewable size, vertical324 mm
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Viewable size, horizontal518.4 mm
Display brightness (typical)350 cd/m²
Supported graphics resolutions640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 1920 x 1200 (WUXGA)
USB hub version3.2 Gen 1 (3.1 Gen 1)
Headphone connectivity3.5 mm
USB upstream port typeUSB Type-B
USB Type-A downstream ports quantity2
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (max)44 W
Power consumption (standby)0.5 W
Power consumption (typical)13.5 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesCB, CCC, CE, China RoHS, ENERGY STAR, EPEAT Bronze, Federal Communications Commission (FCC), ICES, PSE, RCM, RoHS, TCO, TUV, UKCA, VCCI, WEEE, cTUVus
Tilt up angle range- °
Number of OSD languages9
Panel mounting interface100 x 100 mm
On Screen Display (OSD) languagesCHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE
RMS rated power2 W
CertificationCE, UKCA, CB, TÜV/GS, TÜV/Ergonomics (including ISO 9241-307), TCO Certified Generation 9, EPEAT 2018 (US), TÜV/Blue Low Light Content, TÜV/Flicker Free, RCM, cTÜVus, FCC-B, CAN ICES-3 (B), TÜV/S, PSE, VCCI-B, EPA ENERGY STAR, RoHS, WEEE, China RoHS, CCC
Product colorBlack
Cables includedAC, USB
Harmonized System (HS) code85285210
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)190 mm
Height (with stand)351.4 mm
Weight (with stand)5700 g
Depth (without stand)45.5 mm
Width (without stand)531 mm
Height (without stand)341.9 mm
Weight (without stand)3700 g

Related product manuals