20
Chapter 3 Advanced Adjustment/Setting
Function Setting Range Description
Advanced
Settings
Overdrive Enhanced
Standard
Off
This function allows you to set the overdrive intensity based
on the use of the monitor.
Image lag can be reduced by using the “Enhanced” setting
when displaying moving images.
Attention
• Depending on the combination of “Picture Expansion”
(page 21) setting and resolution, this function may not
work.
Hue -50 to 50
Adjust the hue.
Note
• Using this function may prevent some color gradations
from being able to be displayed.
Saturation -50 to 50
Adjust the color saturation.
Note
• Using this function may prevent some color gradations
from being able to be displayed.
• The minimum value (-50) changes the screen to
monochrome.
Gain 0 to 100
The brightness of each red, green, and blue color component
is referred to as “Gain”. The hue of “white” can be changed
by adjusting the gain.
Note
• Using this function may prevent some color gradations
from being able to be displayed.
• The gain value changes according to the color
temperature.
• When the gain is changed, the color temperature setting
changes to “Off”.
Reset - Reset any color adjustments for the currently selected color
mode back to the default settings.
To Next Page
Loading...
