31
6 SPECIFICATIONS
E
6 SPECIFICATIONS
Electrical Specifications
CRT 55 cm (21 inch) class, 90° deflection Invar Shadow Mask
with Anti- Reflective SuperErgoCoat
®
CRT AG Pitch 0.26 mm
Scan Frequency(Horizontal): 30 kHz-130 kHz (Automatic)
Scan Frequency (Vertical): 50 Hz-160 Hz (Automatic)
Max. Active Display Area 402 mm (H) × 300 mm (V) (15.8” (H) × 11.8” (V))
(Viewable image size: 501 mm (19.7”))
* Display size can be set by the user through microprocessor
control panel.
* The actual size displayed can be dependent on the graphics
board or PC utilized.
Power Supply 100-120/220-240 VAC±10%, 50/60 Hz, 1.8/0.8 A
Power Consumption
Normal/Max.: 130 W/150 W* (* with EIZO optional speaker attached)
PowerManager Mode 1: Less than 10 W
PowerManager Mode 2: Less than 3 W
Input Connector D-Sub mini 15-pin and BNC × 5 (Switchable)
Recommended Resolution 1600 dots × 1200 lines
Input Signal
Sync: • H/V Separate, TTL, Positive/Negative
• H/V Composite, TTL, Positive/Negative
• Sync on Green 0.3 Vp-p, Negative
Video: • Analog 0.7 Vp-p/75 W , Positive
Plug & Play VESA DDC1/2B
Mechanical Specifications
Dimensions 494 mm (W) × 486 mm (H) × 520 mm (D)
(19.4” (W) × 19.1” (H) × 20.5” (D))
Weight 29.0 kg (63.9 lbs.)
Environmental Specifications
Temperature operating: 0°C to 35°C (32°F to 95°F)
storage: -20°C to 60°C (-4°F to 140°F)
Humidity 30% to 80% R.H. Non-condensing
Certifications and Standards
100-120 VAC range UL/C-UL, FCC-B, DHHS, TÜV Rheinland/Ergonomics
Approved, TCO’99, EPA Energy Star
®
Program
220-240 VAC range CE, CB, TÜV Rheinland/GS, TÜV Rheinland/Ergonomics
Approved, TCO’99, EPA Energy Star
®
Program
To Next Page
Loading...
