10
Mobile App
First time users download and install
EJEAS SafeRiding Mobile App.
Press and hold (approx. 5s) <phone
button> until the red and blue lights
flash alternately fast.
Open the APP, click on the Bluetooth icon in the
top right corner, the interface shows the name of
the intercom device searched, select the intercom
device to be connected, click to connect.
(IOS system need to enter the phone pairing again,
in the system settings->Bluetooth, connect audio
Bluetooth)
The next time you use the app, open it, click on
the Bluetooth icon in the top right corner and click
to select Intercom for connection from the paired
devices.
APP provides intercom group, music control, FM control, switch
off, check authenticity and other functions.
Alternating red and blue lights
flashing fast
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
To Previous Page
Loading...
