TECNOEKA Srl ___________________________________________________________ operating and instruction manual
page 22 _____________________________________________________________________________________________
Touch the “STEP” key to select the TIME parameter and touch keys and to set
the desired value. The value is automatically confirmed after 5”.
From PARAMETER SCREEN "TEMPERATURE IN CHAMBER"
After setting the TIME parameter, touch the “SELECT” key: the screen concerning the 3
different TEMPERATURE parameters is displayed (Temperature in cooking chamber/Core
temperature/Delta T). For the operator's convenience a 180°C TEMPERATURE IN COOKING
CHAMBER is already set. To modify the set value use the keys and . Touch the “SELECT”
key to confirm the set values.
From OVERVIEW SCREEN
Touch the “STEP” key to select the TEMPERATURE parameter and touch keys and
to set the desired value. The value is automatically confirmed after 5”.
From PARAMETER SCREEN “% HUMIDITY/STEAM” (optional function)
After setting the value of the parameter “TEMPERATURE IN CHAMBER”, use the “SELECT”
key: the parameter screen “% HUMIDITY/STEAM” is displayed.
Use the keys and to set the desired value. Touch key “SELECT” to confirm the set
value.
From OVERVIEW SCREEN
Touch key “STEP” to select the TIME parameter then touch keys and to set the
desired value. The value is automatically confirmed after 5”. Use the “START/STOP” key
to activate the cooking cycle.
4.3.6.2 Cooking cycle with core temperature and temperature in chamber
From "TIME" PARAMETER SCREEN
If the CORE TEMPERATURE is set it is not required to set the TIME parameter.
By using the “STEP” key there is in any case the possibility to choose the options “PAUSE”
and “MAINTENANCE”.
Touch the “SELECT” key to confirm the set values.
From PARAMETER SCREEN TEMPERATURE IN CHAMBER
Use the keys and to set the desired value.
Touch the “STEP” key to select the "CORE TEMPERATURE" parameter and touch keys
and to set the desired value. Touch the “SELECT” key to confirm the set values.
To Next Page
Loading...
