EKO MS-80 - Page 50

EKO INSTRUMENTS CO., LTD. - Pyranometer MS-80/80S/80U - Instruction Manual Ver. 1
Pg. 49
5) Setting items
1. COMMUNICATION setting items
Item Name Setting contents Setting range
Mode
Modbus Switch to Modbus 485 RTU interface (Default)
SDI-12 Switch to SDI-12 interface.
Serial
communication
Auto search OFF/ON: Manual/Auto-connect
COM Port COM1 to COM256
Baud rate 2400 / 4800 / 9600 /19200 / 38400 / 115200bps
Parity Even / Odd / None
Addresses
Modbus address [1-
247]
1 to 247 (last 2 digits of serial number is default
address, 100 when “00”)
Register Type S-series/ M-series/ SMP-series/ SRD-series
SDI-12 address 0 to 9 / A to Z / a to z
Connection status --- Connected / Disconnect
Figure A3-13. Settings screen
“Output” button
“Read” button
"Save" button
Figure A3-14. Communication setting screen