ekwb EK-Quantum Magnitude - Step 2: Select and Align Jet Plate; Step 3: Reinstall Coldplate

- 12 -
STEP 2
STEP 2
Choose the appropriate Jet Plate according to the table below,
ensure that it is correctly aligned in the Insert and the O-Rings remain
in position.
Socket Default Jet Optional Jet
115X 0.6C 0.7C
115X - Flat Coldplate 0.5C -
20XX 0.5P 0.6P
20XX - Flat Coldplate 0.5P -
AM4 0.5P 0.6P
AM4 - Flat Coldplate 0.5P -
STEP 3
STEP 3
Replace the Coldplate paying attention to the orientation, failure to
do so will prevent installation of the Screws. The curvature marking
should be on the same side as the curvature marking of the Frame.
Lastly screw in the four Screws, do not use excessive force!
Jet Plate
Screw
Coldplate