ekwb EK-Quantum Magnitude - Step 4: Refit Frame and O-Ring; Step 5: Install Jet Plate

- 15 -
STEP 4
Put the Frame into place and then refit the O-Ring between the
Frame and Top. Pay attention to the orientation of the Frame,
failure to do so will prevent installation of the Screws. The curvature
marking should be in line with either end of the Jet Plate opening
as illustrated.
STEP 5
Fit the Jet Plate and make sure it is correctly positioned in the Insert.
STEP 4
STEP 5
O-Ring
Curvature Marking
Jet Plate