ekwb EK-Quantum User Manual

- 7 -
Connect the 3-pin D-RGB LED connector from your Flow Indicator
to the D-RGB header on your motherboard or controller. The lights
will work if the pin layout on the header is as follows: +5V, Data,
Empty, Ground.
Incorrect installation or choosing the incorrect header may
result in damage to the LED Strip or the header itself.
D-RGB Header
RGB Header
CONNECTING THE D-RGB LED STRIP

ekwb EK-Quantum Specifications

General

Brand	ekwb
Model	EK-Quantum
Category	Measuring Instruments
Language	English