INSTALLATION
Caution
1. Before refilling coolant for testing the water cooling system, please make sure
again that all water tubes and connectors are securely fitted and correctively
positioned. (EK-EKoolant high quality coolant is recommend)
2. If any fault develops not caused by pump but caused by falsely installation, the
damage is not covered by the two (2) year warranty.
3. Please notice that if the water tube is folded to cause the water flow stopped
while installation.
4. Forbid to operate EK pump without liquid.
5. Operating environment: Indoor or in the computer case, environment
temperature range is 0 ~ 60
o
C.
6. While removing water tubes, be sure to keep the device of these tubes away
from any electronic part.
7. If you hear noise of bubbles while pump is operating, please make sure that the
air pocket is out of the pump. (to see details in Annotation below)
3
To Next Page
Loading...
