ekwb Velocity-AMD - CONNECTING THE RGB LED STRIP (option); CONNECTING THE RGB LED STRIP

- 9 -
CONNECTING THE RGB LED STRIP (option)
RGB LED Connector
CONNECTING THE RGB LED STRIP
STEP 1
Plug the 4-pin connector from Water block’s and Fan’s RGB LED light
to the RGB HEADER on the motherboard. The LED will work if the pin
layout on the header is as follows: +12V G R B.
Please ensure that the arrow indicated on the connector
is plugged into the +12V line as indicated on your
motherboard.
Failure to do so, will damage your motherboard or LED strip.
STEP 1
RGB Header