A
Amanda JonesSep 12, 2025
Why is the output level too low on my ELAC Bass 130 Active with RCA jack?
- TTyler HendrixSep 12, 2025
If you're experiencing a low output level on your ELAC Subwoofer with the RCA jack, it could be because the short RCA-link L-R is not inserted. Use a short RCA interconnect or bridge. Alternatively, the output level from the source (preamp, surround decoder) might be too low. Increase the output level of the preamp (a minimum of 0.2 volts is needed) and reduce the power amp gain for compensation. You could also reduce the gain for the main, center, or effect speakers somewhat and increase the master volume to compensate.