Need help?Do you have a question about the ELAC S10 and is the answer not in the manual?
General| Enclosure Type | Bass Reflex |
|---|---|
| Type | Powered Subwoofer |
| Driver Size | 10 inches |
| Amplifier Power Peak | 400W |
| Peak Power Handling | 400W |
| Crossover Frequency | 50Hz - 150Hz |
| Woofer | 1 x 10-inch |
Read and follow all safety instructions, observe warnings, and check speaker for damage before use.
Use only as directed; level speaker with spikes/feet for stability, preventing tip-over.
Install on level surface; avoid direct sunlight, humidity, vibrations, extreme temperatures, CRT TVs, and magnetic cards.
Unbox carefully, keep equipment off before connecting RCA, and ensure power cable is secure to prevent shock.
Control to adjust subwoofer output level for seamless integration with your audio system.
Adjusts the crossover point between 50 Hz and 150 Hz for optimal bass integration.
Invert polarity 180 degrees to match main speakers and improve subwoofer signal blending.
Options: 'On', 'Off', or 'Auto' which senses audio signal and enters standby mode.
Connect to AV receiver or pre-amp using RCA cables for LFE/Left or stereo inputs.
Blue LED indicates subwoofer is powered on; no light means off or standby.
Socket for connecting the provided power cord to an AC power source.
Use an RCA cable from AV Receiver's LFE/Subwoofer output to the subwoofer's Left input (Fig 1).
Use stereo RCA cables for Left/Right inputs; employ a splitter if the pre-amp has only one output (Fig 2).
3-year cabinet/driver, 1-year amplifier warranty; excludes commercial use, modifications, abuse, or removed serial numbers.
Contact ELAC America for service; proof of purchase required; buyer responsible for shipping costs.
For claims outside US/Canada, contact the local dealer or distributor in the country of purchase.
To Next Page
