EasyManuals Logo

ELAC Debut Reference DBR62 User Manual

ELAC Debut Reference DBR62
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Center Speaker Setup
The ELAC DCR52 center channel speaker is designed to produce dialog sounds and should be positioned
above or below (fig. 3) your television. Align it with the center of the television. As much as possible, try to keep
the DCR52 close to the same level (height) as your front speakers for a more even sound stage. Keeping the
same height for the center channel can be very challenging so it might be necessary to tilt the center speaker
up (if too low) or down (if too high), to aim it towards the listening area.
Optimal results for the center are obtained by setting the receiver/processor center channel size to small. If you
have a choice, set the crossover frequency to 80Hz.
ELAC Debut Reference Speakers | www.elac.com | Page 9
Place Above
or Below
Television

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELAC Debut Reference DBR62 and is the answer not in the manual?

ELAC Debut Reference DBR62 Specifications

General IconGeneral
Enclosure TypeBass Reflex
Tweeter1-inch Cloth Dome
Nominal Impedance6 Ohms
Max Power Input120 Watts
Woofer6.5-inch aramid fiber cone
Frequency Response44Hz - 35kHz
Sensitivity86dB at 2.83V/1m
Crossover Frequency2.2kHz
Cabinet Finishwalnut

Related product manuals