EasyManuals Logo

ELAC Debut Reference DBR62 User Manual

ELAC Debut Reference DBR62
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
ELAC Debut Reference Speakers | www.elac.com | Page 6
Speaker Placement
Achieve maximum performance and optimal sound quality from your ELAC Reference speakers with proper
speaker placement and set-up. While not all rooms are the same, use the following guidelines to configure the
speakers for your particular room. There are no “exact” rules or boundaries in setting up your speakers but the
following suggestions will help optimize your desired results. Remember the best sound set-up is what sounds
best for you so don’t be afraid to experiment and make adjustments to the placement and directivity of the
speakers.
Place the speakers approximately one to two feet away (fig. 1) from boundaries such as wall(s) and especially
corners. Close proximity to a side or rear wall will enhance bass performance (output), but being too close
(particularly to a corner) may result in bass that is unnatural. If a corner location is unavoidable, try to position the
loudspeaker so that the distance to the rear wall is not equal to the distance to the side wall.
Walls
FIG. 1
1’ - 2’ Feet

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELAC Debut Reference DBR62 and is the answer not in the manual?

ELAC Debut Reference DBR62 Specifications

General IconGeneral
Enclosure TypeBass Reflex
Tweeter1-inch Cloth Dome
Nominal Impedance6 Ohms
Max Power Input120 Watts
Woofer6.5-inch aramid fiber cone
Frequency Response44Hz - 35kHz
Sensitivity86dB at 2.83V/1m
Crossover Frequency2.2kHz
Cabinet Finishwalnut

Related product manuals