Installing and Removing the Grills
The mesh grills of your Debut Reference speakers are designed to be removable if desired. To remove it, hold
the top or bottom edges of the grill and pull gently. To replace the grill, align the edges of the grills with the
edges of the cabinet. The grill will be positioned and hold in place by the magnets incorporated in the grill.
IMPORTANT!
ELAC DFR52 Floorstanding Speakers Safety Clip
The ELAC DFR52 Floorstanding speakers include a safety clip in the accessories bag. Install this safety clip
on back of the cabinet for securing the cabinet to a wall to prevent tip-over. Use support hooks (not included)
screwed into a wall and pass appropriate size cord (not included) around the hook and through the safety clip.
Test to ensure mounted hooks and cord will prevent tipping of the speaker.
CAUTION:
The safety clip is not a mounting fixture and the speaker should not be hung on the wall using the clip. ELAC
does not claim responsibility for damage resulting from improper assembly, installation, insucient strength of
the installation materials, misuse, or natural disasters.
ELAC Debut Reference Speakers | www.elac.com | Page 5
Wall
Support Hooks & Cords
(not included)
Safety Clip (provided as
accessories)
DFR52 Floorstanding Speaker
To Next Page
Loading...
Need help?
General
