Connection of the subwoofer Page 37
Remote start function:
Some surround amplifiers/ surround receivers support remote operation of connected devices. The subwoofers SUB
211 D, SUB 2060 D and SUB 2080 D can be controlled with this function. If the subwoofer is operated in the “Auto”
mode and the receiver is switched on, then the subwoofer returns from the stand-by mode to the normal operating
mode. If the receiver or amplifier is switched off, then the subwoofer automatically switches over to stand-by mode.
The connection is established with a mono-jack cable with a 3.5 pin diameter.
To Next Page
Loading...
