ELAC Uni-Fi 2.0 User Manual

ELAC Uni-Fi 2.0 Speakers | www.elac.com | Page 6
Stereo Setup
• For the best results and the most realistic stereo image and lifelike sound, place the speakers so that an
equilateral triangle (fig. 2) is created between the speakers and your favorite listening position. This set
up creates the optimum imaging performance.
• If you find that your front left and right speakers are too far apart, angle (toe in) them towards the
listening position to gain a more focused central image.
2–CHANNEL STEREO SETUP

ELAC Uni-Fi 2.0 Specifications

General

Nominal Impedance	6 Ohms
Sensitivity	85 dB
Max Power Input	140 Watts
Tweeter	1-inch Soft Dome
Midrange	4-inch Aluminum Cone
Woofer	5.25-inch Aluminum Cone
Cabinet Finish	Black Ash Vinyl
Speaker Type	3-way
Frequency Response	46Hz - 35kHz
Crossover Frequency	200Hz / 2000Hz
Recommended Amplifier Power	40-140 Watts per channel