ELAC Uni-Fi 2.0 Speakers | www.elac.com | Page 3
Philosophy
Thank you for purchasing this ELAC product.
Since the time we started (1926), ELAC has always striven to achieve the very best.
Your new ELAC speakers are built to the highest standards using high-quality components that are carefully
constructed to deliver the best-in-class sound quality. They are developed by a passionate group of individuals
whose soul purpose is to bring a new dimension of sound quality into your home. Enjoy!
Before Use
Avoid damage to the speakers and other components:
• Carefully unbox the speakers carefully to avoid physically damaging your speakers.
• Use appropriate gauge wires (minimum of 14 gauge wire for runs up to 25 feet).
• Make sure wire polarity is connected correctly. Most speaker cables are coded for ease of use. Make
sure positive (red) connection on the amplifier terminal is connected to the positive (red) on your
speakers. Follow the same instructions for the negative side. Strip o approximately 1/2”of the insulation
from the ends of the speaker cable, twist the bare strands and insert into the binding post.
• Ensure your equipment is turned o before connecting speakers.
• Check to ensure positive and negative wires are not touching each other once they’re connected to the
speaker terminals.
- +
Amplifier
To Next Page
Loading...
Need help?
General
