EasyManuals Logo

ELAC Uni-Fi 2.0 User Manual

ELAC Uni-Fi 2.0
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Surround Sound Setup
Whether you use the Uni-Fi 2.0 bookshelf or the Uni-Fi 2.0 floorstanding speakers for a 5.1-channel surround
set-up, avoid placing the surround speakers forward of your listening position. The surround speakers should
be spread apart wider than the front speakers. In addition, elevate the speakers to the same height or slightly
higher as the front speakers for the most enveloping sound field. Like the front speakers, you may need to
experiment with the positioning by pointing the rear surround speakers towards the listening area.
ELAC Uni-Fi 2.0 Speakers | www.elac.com | Page 7

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELAC Uni-Fi 2.0 and is the answer not in the manual?

ELAC Uni-Fi 2.0 Specifications

General IconGeneral
Nominal Impedance6 Ohms
Sensitivity85 dB
Max Power Input140 Watts
Tweeter1-inch Soft Dome
Midrange4-inch Aluminum Cone
Woofer5.25-inch Aluminum Cone
Cabinet FinishBlack Ash Vinyl
Speaker Type3-way
Frequency Response46Hz - 35kHz
Crossover Frequency200Hz / 2000Hz
Recommended Amplifier Power40-140 Watts per channel

Related product manuals