Owner's Manual
6
6.1
•
•
•
•
•
•
The craft is fitted with the following motive power:
Take care not to damage fuel lines and check regularly that they are in
good condition
Caution
NAVIGATION & OPERATION
Check the bilge water level.
Ensure that ventilation openings are clear to prevent
overheating
So as to avoid moving parts, never access the engine space when
engines are running.
Avoid placing flammable materials on or near hot parts.
Volvo & Yanmar options (Engine installed Volvo D240)
3 blade folding (from Volvo)
Information
Run engine compartment blower for 4 minutes before stating
the engine
Before starting the engine:
If a fuel leak or fumes are detected, do not start the engine. Ensure all
crew leave the boat and have a qualified person repair the fault as soon
as possible.
Engine Compression ignition
Ensure there is sufficient fuel for the anticipated journey -
including a margin for contingencies.
Check engine compartment for fumes.
Use of Engines
Propeller
Danger
Check fuel lines for damage & leaks.
Technical Software
© Licensed User: Elan d.o.o., 2019
36/44
To Next Page
