EasyManua.ls Logo

Elan Impression i40.1 - Filling With Fuel

Elan Impression i40.1
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Owner's Manual
6.6
Information
Caution
Close deck fittings tightly, but don't over-tighten since this will
damage the rubber o-rings
Splash water over the deck-area around the filler cap - before
filling. This will prevent spilled fuel from adhering to the deck
surface
Don't fill the tank to its maximum: allow for expansion
Fuel is considered chemical waste. Keep an absorbing cloth close by
when filling tanks.
Check the contents of the tank by monitoring the tank level
indicator
Open the filler cap & start filling the tank.
(make an entry in ship's log)
Caution
Filling With Fuel
For locations of filler caps, see: 3.2.4
Use the following procedure for filling tanks:
Never smoke when refuelling, or inspecting or working with the fuel
system.
Technical Software
© Licensed User: Elan d.o.o., 2019
39/44