2 2
I N S T A L L A T I O N G U I D E L I N E S
POTENTIAL INTERNAL FIXTURE DAMAGE FROM EXTERNAL SOURCES OF LIGHT BEAMS
External sources of light beams from direct sunlight, lighting moving head xtures, and lasers,
which are focused directly towards the exterior housing and/or penetrate the front lens
opening of ELATION lighting xtures, can cause severe internal damage including burning to
optics, dichroic color lters, glass and metal gobos, prisms, animation wheels, frost lters, iris,
shutters, motors, belts, wiring, discharge lamps, and LEDs.
This issue is not specic only to ELATION lighting xtures, it is a common issue with lighting
xtures from all manufacturers. Although there is no true way to fully prevent this issue from
happening, the guidelines below can prevent any potential damage from occurring if followed.
Contact ELATION Service for more details.
DO NOT EXPOSE THE FIXTURE AND/OR FRONT LENS OPENING TO LIGHT
BEAMS FROM DIRECT SUNLIGHT, OTHER LIGHTING MOVING HEAD FIXTURES,
AND LASERS WHILE UNPACKING, INSTALLATION, USE, AND EXTENDED IDLE
TIMES OUTDOORS. DO NOT FOCUS A LIGHT BEAM FROM ONE LIGHTING
FIXTURE DIRECTLY TOWARDS ANOTHER.
To Next Page
Loading...
