EasyManua.ls Logo

Elation Proteus Lucius - Page 7

Elation Proteus Lucius
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
S A F E T Y G U I D E L I N E S
RISK GROUP 3 - RISK OF EXPOSURE TO ULTRAVIOLET UV
RADIATION! FIXTURE EMITS HIGH INTENSITY WAVELENGTH OF
ULTRAVIOLET UV LIGHT FROM THE UV COLOR FILTER. WEAR
PROPER EYE AND SKIN PROTECTION. AVOID PROLONGED PERIODS
OF EXPOSURE TO UV COLOR FILTER. AVOID WEARING WHITE
COLOR CLOTHING AND/OR USING UV PAINTS ON SKIN. AVOID
DIRECT EYE AND/OR SKIN EXPOSURE AT DISTANCES LESS THAN 11
feet (3.3m). DO NOT OPERATE FIXTURE WITH DAMAGED/MISSING
EXTERNAL COVERS. DO NOT LOOK DIRECTLY INTO THE UV LIGHT
AND/OR VIEW UV LIGHT DIRECTLY WITH OPTICAL INSTRUMENTS
THAT MAY CONCENTRATE THE LIGHT/RADIATION OUTPUT.
INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE DIS-ORDERS,
OR INDIVIDUALS USING PHOTOSENSITIVE MEDICATION, MAY RECEIVE DISCOMFORT IF EXPOSED TO
THE ULTRAVIOLET UV LIGHT EMITTED FROM THE UV LED.
DO NOT TOUCH the xture housing during operation. Turn OFF the power and allow approximately
15 minutes for the xture to cool down before serving.
DO NOT shake xture, avoid brute force when installing and/or operating xture.
DO NOT operate xture if the power cord is frayed, crimped, damaged and/or if any of the power
cord connectors are damaged and do not insert into the xture securely with ease. NEVER force a
power cord connector into the xture. If the power cord or any of its connectors are damaged,
replace it immediately with a new one of similar power rating.
DO NOT block any air ventilation slots.
All fan and air inlets must remain clean and never blocked.
Allow approx. 6” (15cm) between xture and other devices or a wall for proper cooling.
Always disconnect xture from main power source before performing any type of service and/or
cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by tugging
the wire portion of the cord.
During the initial operation of this xture, a light smoke or smell may emit from the interior of the
xture. This is a normal process and is caused by excess paint in the interior of the casing burning
o from the heat associated with the lamp and will decrease gradually over time.
Consistent operational breaks will ensure xture will function properly for many years.
ONLY use the original packaging and materials to transport the xture in for service.
89.9 lbs. (40.8kg)

Related product manuals