elco THISION L PLUS - Change the Time and Date

80
Commissioning
Change the time and date
2 Use “+” to go down and “–” to go
up to highlight
Complete Menu.
Press OK.
3 Use “+” to go down and “–” to go
up to highlight
Screen Settings.
Press OK.
4 Use “+” to go down and “–” to go
up to highlight
Time & Date.
Press OK.
5 Use “+” to go down and “–” to go
uptohighlightthedesiredeld.
Press OK.Therelevanteldstarts
toash.
Use “+” to go down and “–” to go
up to highlight the correct value.
Press OK.
Aftercorrectlylledinallelds,
Press Save.
The message in the screen left
appears.
The settings are saved.
Attention:
in case of the boiler is connected to
Wi, the date and time are actualised
automatically.
25/03/19 09:00
–10
°
1.5 bar
CH Pump Overrun
1 2
T10
BMS
32
°
1 From the controller Home screen, press OK.