81
Commissioning
Parameter adaption to the heating system
The settings are accessable
through a code.
2 Use “+” to go down and “–” to go
up to highlight
007 as the Technical Code.
Press OK.
3 Use “+” to go down and “–” to go
up to highlight
Complete Menu.
Press OK
It is now loading the menu.
25/03/19 09:00
–10
°
1.5 bar
CH Pump Overrun
1 2
T10
BMS
32
°
1 From the controller Home screen, press the ESC and OK buttons at the same
time for 7 seconds.
To Next Page
Loading...
