To Next PageTo Next PageWhat to do if my elco Burner does not start but shows no malfunction?
If your elco Burner doesn't start and the automatic combustion control unit shows no malfunction, it could be due to a drop in supply voltage or a power failure. You should check the cause of the voltage drop or power failure. Another possible cause is a control unit malfunction, in which case you should replace the control unit.
Why does elco Burner start and then shut down after preventilation?
If the elco Burner starts and then shuts down after preventilation, it could be due to a parasitic flame during the preventilation/pre-ignition phase. You should check the ignition sparks and adjust or replace the electrode. Also, check or replace the fuel-oil solenoid valve.
How to fix elco Burner with no heat request?
If there is no heat request for your elco Burner, the thermostats might be defective or incorrectly adjusted. Adjust the thermostats or replace them if necessary.
Detailed breakdown of the burner's physical components and their layout.
Describes the burner's operation when heat is requested by the system.
Outlines the burner's sequence during normal operation after ignition.
Explains the safety shutdown procedures and conditions for the burner.
Illustrates the basic functional components and their interconnections.
Details the control unit, its functions, and operating sequence.
Provides a detailed chart of terminal and connector assignments for electrical connections.
Covers the physical mounting of the burner and setting the installed depth.
Instructions for installing the flame tube into the burner head.
Guides on making the necessary electrical and fuel oil line connections.
Lists essential checks to perform before the initial start-up of the burner.
Provides tables and instructions for setting burner output and air intake.
Explains how to adjust and check the fuel oil pressure for optimal output.
Details critical checks to ensure proper burner operation and safety functions.
Outlines general maintenance procedures and specific work positions.
Describes how to monitor flue gas temperature for boiler efficiency.
Instructions for correctly assembling or replacing the blower wheel.
Explains how to interpret and use the unit's maintenance and fuel level indicators.
Provides a systematic approach to identifying and resolving burner malfunctions.
General
