Elcomed SA-310 - Switch on; Switch off Elcomed

23
11. Switch on / switch off Elcomed
Switch on Elcomed
 Connect the Elcomed to the
power supply.
 Turn the Elcomed on at the
power switch.
Switch off Elcomed
 Turn the Elcomed off at the
power switch.
 Disconnect the Elcomed from
the power supply.
Test run
> Start the motor.
> In the event of malfunctions (e.g. vibrations, unusual noises, overheating, coolant failure or leakage),
stop the motor immediately und contact an authorized W&H service partner (see page 72).