50
Hygiene and maintenance
Motor with cable / Motor support / Stand
> Do not immerse the motor with cable, the motor support or the stand in liquid disinfectant or in an ultrasonic bath.
Motor with cable / Motor support / Stand
> Clean the motor with cable, the motor support and the stand under running tap water (< 35°C / < 95°F).
> Rinse and brush off all internal and external surfaces.
> Remove any liquid residues using compressed air.
Control unit
> Do not immerse the control unit in water or clean it under running water.
Foot control
> The ESD spring contact on the bottom of the foot control must be cleaned regularly.
Manual cleaning
To Next Page
Loading...