Need help?Do you have a question about the Elcometer 108 and is the answer not in the manual?
General| Brand | Elcometer |
|---|---|
| Model | 108 |
| Category | Test Equipment |
| Language | English |
Verify all items included in the Elcometer 108 package.
Understand the high pressure operation and safety precautions for the gauge.
Step-by-step guide on attaching the test dolly to the coated surface using adhesive.
Instructions on how to connect the adhesion tester gauge to the attached dolly.
Procedure for applying hydraulic pressure and recording the adhesion test results.
Steps to follow after completing the adhesion test, including pressure release.
Instructions for cleaning the test dolly after use, including safety warnings.
Guidance on using dolly plugs, especially with low viscosity adhesives.
Information on suitable adhesives and coatings for testing.
Requirements for substrate material suitability and limitations.
How to test coatings on curved surfaces and the use of curved dollies.
Details on using a dolly cutter to isolate the test area.
Operating instructions for the digital pressure gauge features like units and backlight.
Methods for verifying the gauge's calibration using a verification unit.
Routine maintenance tasks to ensure the gauge's longevity and performance.
Detailed performance specifications for analogue and digital instruments.
Pressure ratings for the rubber hose and connector components.
Physical dimensions, weight, and carrying case specifications.
Specifications for the type, weight, storage, and shelf life of the adhesive.
Information on the battery type for the digital gauge version.
Specifications for the digital display type, character height, and backlight.
To Next Page
