5 SPARES & ACCESSORIES (continued)
5.2 PROBE IDENTIFICATION TAGS
Available to purchase as an optional accessory,
each tag is numbered 1 to 6 to help match each
probe with its assigned channel.
Description Part Number
Probe Identification Tags, Pack of 6 T21521241
5.3 THERMAL BARRIERS & HEAT SINK BLOCK
The Elcometer 215 Model S and T are supplied
with a thermal barrier as standard.
The thermal barrier supplied with the
Elcometer 215 Model T is compatible with the
heat sink block. When used together, they
enable the logger to be used at elevated
temperatures over a longer time period, see
‘Thermal Characteristics’ table on page en-7 for
further . information
DO NOT use the heat sink block if the heat sink material is in
liquid form, see Appendix B ‘The Heat Sink Block’ on page
en-21 for further information.
Description Part Number
Standard Thermal Barrier (supplied with Model S) T21521222
High Temperature Thermal Barrier (supplied with Model T) T21521217
d
Heat Sink Block (supplied with Model T) T21521219
Note: The heat sink block can only be used with the high temperature thermal barrier
which has a larger cavity. It is not compatible with the Standard Thermal Barrier.
www.elcometer.com
en-10
R
d
Heat Sink Block not included.
To Next Page
Loading...