Need help?Do you have a question about the Elcometer 215 and is the answer not in the manual?
General| Brand | Elcometer |
|---|---|
| Model | 215 |
| Category | Data Loggers |
| Language | English |
How to install and replace the logger's batteries.
Steps to choose the user interface language from available options.
Guide to selecting between Celsius (°C) and Fahrenheit (°F) for readings.
Instructions for configuring the date display format (DD/MM/YY, etc.).
Process for setting the device's current time and date accurately.
How to define the frequency for taking and saving readings.
Guidance on connecting K-type temperature probes to the logger's sockets.
Information on using the thermal barrier and heat sink block for oven protection.
Prerequisites and initial setup steps before operating the logger.
Instructions on how to initiate data recording sessions.
Procedures for manually stopping an ongoing data logging session.
Steps to transfer recorded data from the logger to a PC.
How to erase all stored data from the logger's memory.
Details on available K-type temperature probes and their specifications.
Information about optional tags for identifying probes and their channels.
Description of thermal barriers and heat sink blocks as accessories.
Initial steps for preparing to use the ElcoMaster® software.
Steps to create and configure logger settings files using ElcoMaster®.
How to define paint types for cure calculation within ElcoMaster®.
Adding product-specific information and diagrams in ElcoMaster®.
Combining logger settings, paint type, and product info into templates.
Procedures for uploading configurations to the logger from ElcoMaster®.
Instructions for downloading recorded data from the logger via ElcoMaster®.
How to view and analyze logged data using ElcoMaster® features.
Generating reports from logged data using ElcoMaster®.
To Next Page