3
1.1 STANDARDS
The Elcometer 415 can be used in accordance with the following National and International Standards:
AS 2331.1.4, AS/NZS 1580.108.1, ASTM B 499, ASTM D 7091 supersedes ASTM D 1186-B & ASTM D
1400, ASTM E 376, BS 5599, EN 13523-1 supersedes ECCA T1, IS0 2360 supersedes BS 5411-3,
ISO 2808-7C supersedes ISO 2808-6A, BS 3900-C5-6A, BS 5411-11 & DIN 50981, ISO 2808-7D
supersedes BS 3900-C5-6B, BS 5411-3, DIN 50984 & ISO 2808-6B, ISO 2808-12, NF T30-124.
2 WHAT THE BOX CONTAINS
• Elcometer 415 Gauge
• 4 x Check Foils: 50, 125, 500 and 1000 µm / 2, 5, 20, and 40 mils (Paint and Powder Gauge only)
• 4 x Check Foils: 25, 75, 125 and 250 µm / 1, 3, 5, and 10 mils (Automotive Gauge only)
• Ferrous Checkpiece (Automotive Gauge only)
• Non-Ferrous Checkpiece (Automotive Gauge only)
• Carry Case
• Batteries
• Operating Instructions
The gauge is packed in cardboard and plastic packaging. Please ensure that this packaging is disposed of
in an environmentally sensitive manner. Consult your Local Environmental Authority for further guidance.
To maximise the benefits of your new Elcometer 415, please take some time to read these Operating
Instructions. Do not hesitate to contact Elcometer or your Elcometer supplier if you have any
questions.
415_TMA_0342+_00_03a.fm Page 3 Tuesday, August 25, 2009 10:49 AM
To Next Page
Loading...
Need help?
General
