Opening an existing batch
By selecting Batch/Open Existing Batch, the user will find a list of all
the batches that have been created, together with the number of
readings stored in each batch.
To open a particular batch use the up and down arrow softkeys and
select the appropriate batch.
The Elcometer 130 will return the gauge to the main reading screen
and the selected batch name will be shown at the top of the display
(together with a unique gauge batch id number - allowing no two
batches to have exactly the same name).
Copying an existing batch
By selecting Batch/Copy Batch the user will find a list of all the
batches that have been created, together with the number of readings
stored in each batch.
To copy a particular batch use the up and down arrow softkeys and
select the appropriate batch.
To Next Page
Loading...
